NTS Conducts Tests for the Fauji Fertilizer Management Trainee Program. The Test Pattern is based on MCQs based Type Questions.Fauji Fertilizer Company Limited (FFC) is a Pakistani chemical company which produces chemical fertilizer. It was established by the Fauji Foundation which holds a controlling interest.

FFC Management Trainee Job is announced by the Fauji Fertilizer Company under various Disciplines
  1. Management Trainee Maintenance (Mechanical)
  2. Management Trainee Production (Chemical)
  3. Management Trainee Electrical (Electrical)
  4. Management Trainee Instrumentation (Instrument/ Electronic)
  5. Management Trainee Technical Services Laboratory (Chemistry)
In this blog we will cover the Management Trainee Mainatinace (Mechanical) Test Pattern and Past Paper MCQs.

Total Test Duration: 120 minutes (2 hours)

Test Content Weightage

Core Areas Division %Weight
Verbal Reasoning 25%
Analytical Reasoning 25%
Subject Specific 50%
Total 100%

Verbal Reasoning and IQ Questions

The Vebal Reasoning and IQ Questions cover 25% of the Total Paper which is 25 MCQs. This section contains synonyms,antonyms, one word subsitutuion, corection, analogy question, sentence completion, reading comprehension etc. 

For Preperation of this Section please refer to practice guides of GAT Books. Refer to the Verbal reasoning Question Portion

Example Questions(Past Papers) Include
 

ANALOGY QUESTIONS

  1. Longitude : latitude
    A) Length: Bredth
    B) Equator : Tropic of cancer

    2. Tyrant: Govern

     A) Cheese : Milk

     B) Sort : Criterion

     C) Fugitive : Escape 

     3. BERET : CAP

          there were options releated to that

OPPOSITE QUESTIONS

      A word will be given such as given below and out of which you have to select the correct options           from the given MCQS 

    1. Artifice

        A) Painting

        B) sculpture 

        C) sincerity 

        D) Color

Other Example words

  • Setback
  • Timid
  • Idle
  • Lame

 Most Appropiate Word: Fill in the blank with the most appropiate word

    2. He _______ across the river

         A) Swam

         B)Swim

         C) Walked

         D) Ran

These are some examples of the Questtions from the Past Papers that come in the FFC Managment Trainee Mainataince.

Analytical Reasoning

In this section partial information about a situation is given. The rest of the information about the situation is hidden/omitted such that it is very difficult to answer the question without really understanding and analyzing the whole siutation. Analytical reasoning questions require exactly what the name imples an ability to reason and think in an analyytical manner, weeding through various bits of information, selecting relevent material and discarding irrelevant material. A typical problem of this type providees you with an inital rules or instruction that will asissit yyou in making decsions about the problem. Finally you are asked to answer about specific questions based on the inital information.

In this portion train from the GAT General Books from the anaylytical reasoning section. Practice as much as problems as possible. This portion of the Test is time taking and will take around 30 minutes or more of your time to solve.

Example Include



Refer to books for more practical hand on information as this portion is selected from anywhere. Practice.

Subject Specific

For the Managment Trainee Mechanical Maintainance Test  the Overall Percentage is 50% .The Content Distibution among the subject is

The Distribution among the subjects is as follows


Criteria and Subject Division Subject%Weight
Overall Percentage 50%
Power Plants & Thermodynamics 10%
Engineering drawing and graphics 10%
Materials & Manufacturing Processes 10%
Machine Design 5%
Mechanics of Material 5%
Mechanical Vibrations 5%
Basic Electrical and Electronics 5%


Past Paper Example Questions Include

1. h= u + PV,  in this equation "h" represents:
A)    Entropy
B)     Enthalpy
C)    Internal Energy
D)    Specific Heat

2. Speed in flat rolling process increase with
A) decreasing friction
B) increasing ratio of the roll radius to the strip thickness
C) increasing temperature of the entering strip
D) decreasing ratio of the roll length to the strip width
E) decreasing width to thickness ratio of the entering strip.

3.Waves of___ height are available for Ocean energy.
A) 3 to 4m
B) 2 to 3m
C) 1 to 2m
D) 5 to 10m


4. ___method is used to solder circuit board connections in the electronic industry?
A) wave soldering
B) Drip soldering
C) Drop soldering

5.Which of the following operation is first performed ?
A)Spot facing
B)Boring
C)Tapping
D)Drilling


5. Two important phenomena related to creep are super plasticity and
A) creep diffusion
B) stress jump
C) stress concentration

6. Solar plants are how much efficient?
A) 24
B) 42
C) 30
D) 25

7. Main criteria for shafts is
A) Strength and rigidity
B)Torque and moment
C)Twisting 

8. Which of the following is not type of clutch?
A) Wet cluth
B) Release cluth
C) Semi centrifugal clutch

9. Power Transmission in parallel shafts
A) spur
B) helical
C) herringbone

10. When temperature and pressure decreases then the latent heat of evaporation of refrigerant?
A) Increases
B) Decreases
C) Remains Same
D)None

11) Which type of threads are used in supporting load in one direction
A) Acme
B) Butress
C) Square

12. Spreading in rolling processes increases with
(A) Decreasing width-to-thickness ratio of the entering strip (because of reduction in the width
constraint
(B) Increasing friction
(C) Decreasing ratio of the roll radius to the strip thickness

13. Stress strain diagram is drawn after performing which test?
A.Tensile
B.Compression
C.Shear 

14. Which of the following hardens quickly after heat treatment?
A) Copper
B)Cobaly
C) Duralumin

15. The normal stress is same in all directions at a point in a fluid
A) only when the fluid is frictionless
B) only when the fluid is incompressible and has zero viscosity
C) when there is no motion of one fluid layer relative to an adjacent layer
D) irrespective of the motion of one fluid layer relative to an adjacent layer


These are few example MCQs from the NTS FFC Management Trainee MCQs. Please refer to books and webistites for practice of the MCQs. These MCQs might give you an idea of what questions can be like in the NTS Exam

Refer to Books such as 

R.S Khurmi, J.K Gupta Mechanical Engineering GATE UPSC-ISA AND IES Conventional and Objective Type) Latest Edition

https://www.examveda.com/

and other Preperation Websites for the Preperation of the Test. 


Refer to our Collected MCQs from OGDCL, FFC and Agritech mechanical Trainee MCQs. These are collected from the students that were giving the NTS Test.

Learning Mentor Mechanical Past Papers Collection NTS Mechnical OGDCL FFC AgriTech